1x AABCOOLING Thermal Grease 2 - 8g
- AABCOOLING Thermal Grease 2 (TG-2) 8 g thermal paste: 5.6 W/mK, metal-free, electrically non-conductive. Does not dry out or run, works from -50°C to +170°C. For CPUs, GPUs and chipsets. Includes IPA wipe and spatula.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
Thermal paste for CPUs and graphics cards
AABCOOLING Thermal Grease 2 - 8g is a high-performance thermal paste for processors, graphics cards and other heat-generating electronic components. It contains no metal particles and does not conduct electricity, so there is no risk of short circuits, even on very sensitive components.
Thanks to its thick consistency, the paste does not leak or run beyond the area where it is applied. Unlike silicone pastes, TG-2 does not lose performance over time – its optimal service life is approx. 8 years, so there is no need to reapply it. The paste reaches its best properties after approx. 200 hours of operation. TG-2 is an improved version of the previous AABCOOLING paste.
Key features
- Thermal conductivity of 5.6 W/mK
- Metal-free and electrically non-conductive – no risk of short circuits
- Optimal density and viscosity – spreads precisely under heatsink pressure
- Does not dry out or run
- Easy to apply and remove
- Stable thermal conductivity with no loss of performance over time
- Wide operating range: -50°C to +170°C
Applications
The paste is suitable for desktop PCs, laptops and other electronic devices. Apply it between the heatsink and:
- the processor (CPU),
- the graphics chip (GPU) of the graphics card,
- the motherboard chipset (northbridge and southbridge),
- power delivery sections and other heat-generating electronic components.
How to apply thermal paste
- Remove any old paste residue with the included wipe soaked in isopropyl alcohol and wait a moment for the alcohol to evaporate.
- Use the included spatula to apply a thin layer of paste to the processor surface and spread it evenly.
- When mounting, press the heatsink onto the processor and gently turn it left and right a few times so that the paste spreads evenly between the processor and the heatsink base.
Technical specifications
- Net weight: 8 g
- Colour: grey
- Thermal conductivity: 5.6 W/mK
- Operating temperature: -50°C to +170°C
- Density: 3.73 g/cm³
- Viscosity: 85,000 cps
- Packaging: syringe
What's in the box
- 1 × AABCOOLING Thermal Grease 2 - 8g
- 1 × wipe soaked in isopropyl alcohol (60 × 60 mm)
- 1 × spatula for applying the paste (80 mm long)
Important safety information
WARNING
- Very toxic to aquatic life with long lasting effects.
- Keep out of reach of children.
- Avoid release to the environment.
- Dispose of contents/container in accordance with local/regional/national/international regulations.