1x AABCOOLING Dry PTFE Lubricant 400 ml

Key features

• Dry lubricating film – leaves no greasy layer and does not attract dust or dirt
• Enriched with PTFE – very low coefficient of friction and durable surface protection
• Resistant to moisture and water – performs well in high-humidity environments
• Also works as a release agent
• For metal, plastic, rubber, wood and ceramics
• Free from silicone and mineral oil – safe for delicate mechanisms
• Handy 400 ml spray with nozzle for precise, clean application

How to use the dry PTFE lubricant

Before use, read the warnings on the packaging and the product's safety data sheet.

1. Thoroughly clean the surface to be treated.
2. Shake the can vigorously before use.
3. Spray the product onto the clean surface from a distance of 20–30 cm.
4. Allow 10 minutes to dry.
5. Done – the mechanism is lubricated and protected.

Important safety information

DANGER

• Extremely flammable aerosol.
• Pressurised container: May burst if heated.
• Causes skin irritation.
• Causes serious eye damage.
• May cause drowsiness or dizziness.
• Harmful to aquatic life with long lasting effects.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Do not spray on an open flame or other ignition source.
• Do not pierce or burn, even after use.
• Avoid release to the environment.
• IF ON SKIN: Wash with plenty of water and soap. Take off contaminated clothing and wash it before reuse.
• IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
• Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• Dispose of contents/container in accordance with national regulations.
• Contains: hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane; titanium tetrabutanolate.